For Domestic (for India) Email: sales4@dc-engg.com / Phone: +91-9136470619 / +91-22-6659 5894
For Exports (for other than India) Email: export4@dc-engg.com / Phone: +91-9136470618 / +91-22-2363 4824

CARBON STEEL 12.9 Fasteners

Home
Fasteners

CARBON STEEL 12.9 Fasteners

CARBON STEEL 12.9 Fasteners

How It Work?

Laboratory Tested

Quality Assurance

On Time Delivery

Shipping Globally

Best Services

Specification :-

Specifications	DIN, ISO ,JIS ,GB, IS, BS, ASTM
Standard	ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Size	M0.2 to M33 \| 3/6" to 2" \| Custom Sizes
Length	3 mm to 200 mm \| Custom Sizes
Dimensions	DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Form	Hex, Threading, Square, Round as per Gauge Etc.
Threads	Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically
Threads available	UNF, BSW, BSF, METRIC, UNC, or as required
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification	Dual Certified As per ASTM & ASME Codes
Test Certificate	As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Raw materials Source	JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc.
Packing	IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Surface Coating	Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Phosphate Coating Teflon Coating Xylon Coating Zinc Coating

Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
CARBON STEEL 12.9	-	-

Chemical Composition

Grade	C	P	S	B
Carbon Steel 12.9	0.28-0.5	0.025	0.025	0.003

Mechanical Properties

Element	Nominal thread diameter size range [mm]	Proof strength [MPa]	Yield strength (min) [MPa]	Tensile strength (min) [MPa]	Hardness [Rockwell]
Carbon Steel 12.9	1.6–100	970	1100	1220	C39–44

High Tensile Bolts Dimensions

High Tensile Hex Bolt Dimension

**All measurements in millimeters**

DIA	M4	M5	M6	M8	M10	M12	M14	M16	M18	M20	M22	M24	M27	M30	M33	M36	M39	M42	M45	M48	M52
Pitch	0.7	0.8	1	1.25	1.5	1.75	2		2.5			3		3.5		4		4.5		5
Grade A upto length	40	50	60	80	100	120	140	150					Grade A not applicable to these dia’s
Head Across Flat (S) Nom = Max Min Grade A Grade B	7	8	10	13	16	18	21	24	27	30	34	36	41	46	50	55	60	65	70	75	80
	6.78	7.78	9.78	12.73	15.73	17.73	20.67	23.67	26.67	29.67	33.38	35.38	Grade A not applicable to these dia’s
	6.64	7.64	9.64	12.57	15.57	17.57	20.16	23.16	26.16	29.16	33	35	40	45	49	53.8	58.8	63.1	68.1	73.1	78.1
Head Height (K) Nom Tol + or – Grade A Grade B	2.8	3.5	4	5.3	6.4	7.5	8.8	10	11.5	12.5	14	15	17	18.7	21	22.5	25	26	28	30	33
	0.125	0.15			0.18				0.215				Grade A not applicable to these dia’s
	0.2	0.24			0.29				0.35					0.42							0.5
Across corners e Min Grade A Grade B	7.66	8.79	11.05	14.38	17.77	20.03	23.36	26.75	30.14	33.53	37.72	39.98	Grade A not applicable to these dia’s
Across corners e Min Grade A Grade B	7.5	8.63	10.89	14.2	17.59	19.85	22.78	26.17	29.56	32.95	37.29	39.55	45.2	50.85	55.37	60.79	66.44	71.3	76.95	82.6	88.25
Thread Length (b) For lengths < or = 125mm For lengths > 125mm <= 200mm For lengths > 200mm	14	16	18	22	26	30	34	38	42	46	50	54	60	66	Not specified as full thread recommended
	20	22	24	28	32	36	40	44	48	52	56	60	66	72	78	84	90	96	102	108	116
	33	35	37	41	45	49	53	57	61	65	69	73	79	85	91	97	103	109	115	121	129
Major Dia at thread (min)	3.838	4.826	5.794	7.76	9.732	11.701	13.682	15.682	17.623	19.623	21.623	23.577	26.577	29.522	32.522	35.465	38.465	41.437	44.437	47.399	51.399
Major Dia at thread (max)	3.978	4.976	5.974	7.972	9.968	11.966	13.962	15.962	17.958	19.958	21.958	23.952	26.952	29.947	32.947	35.94	38.94	41.937	44.937	47.929	51.929

High Tensile Hex Bolts In Bsw/Bsf Threads To Bs 1083-1965

All dimensions in Inches

DIA	1/4	5/16	3/8	7/16	1/2	9/16	5/8	3/4	7/8	1	1 1/8	1 1/4	1 3/8	1 1/2	1 3/4	2
BSW Pitch (TPI)	20	18	16	14	12	12	11	10	9	8	7	7		6	5	4.5
BSF PITCH (TPI)	26	22	20	18	16	16	14	12	11	10	9	9	8	8	7	7
Head Across Flat (S) Min Max	0.438	0.518	0.592	0.702	0.812	0.912	1.000	1.190	1.288	1.468	1.640	1.815	2.005	2.175	2.520	2.700
Head Across Flat (S) Min Max	0.445	0.525	0.600	0.710	0.820	0.920	1.010	1.200	1.300	1.480	1.670	1.860	2.050	2.220	2.580	2.760
Head height (K) Min Max	0.166	0.208	0.250	0.292	0.333	0.365	0.407	0.480	0.563	0.636	0.710	0.790	0.880	0.960	1.110	1.270
Head height (K) Min Max	0.176	0.218	0.260	0.302	0.343	0.375	0.417	0.500	0.583	0.666	0.750	0.830	0.920	1.000	1.170	1.330
Across corners e Max	0.51	0.61	0.69	0.82	0.95	1.06	1.17	1.39	1.50	1.71	1.93	2.15	2.37	2.56	2.98	3.19
Thread Length b Min	Twice the Dia (2D)
Major Dia at thread BSW (min)	0.2427	0.3046	0.3666	0.4285	0.4904	0.5527	0.6147	0.7390	0.8653	0.9897	1.1140	1.2388		1.4879	1.7369	1.9862
Major Dia at thread BSW (max)	0.2488	0.3112	0.3736	0.4360	0.4985	0.5609	0.6233	0.7482	0.8750	1.000	1.1250	1.250		1.500	1.750	2.000
Major Dia at thread BSF (min)	0.2432	0.3051	0.3671	0.4290	0.4910	0.5533	0.6153	0.7394	0.8658	0.9902	1.1148	1.2395	1.3640	1.4888	1.7380	1.9876
Major Dia at thread BSF (max)	0.2489	0.3113	0.3737	0.4361	0.4985	0.5610	0.6234	0.7482	0.8750	1.000	1.1250	1.250	1.375	1.500

High Tensile Hex Bolts Unc/Unf Threads To Bs 1768-1963

All dimensions in Inches

DIA	1/4	5/16	3/8	7/16	1/2	9/16	5/8	3/4	7/8	1	1 1/8	1 1/4	1 3/8	1 1/2	1 3/4	2
UNC Pitch (TPI)	20	18	16	14	13	12	11	10	9	8	7	7	6	6	5	4.5
UNF Pitch (TPI)	28	24	24	24	20	20	18	16	14	12	NOT RECOMMENDED
Head Across Flat (S) Min Max	0.430	0.493	0.554	0.617	0.742	0.804	0.929	1.115	1.300	1.488	1.657	1.830	2.017	2.205	2.565	2.940
Head Across Flat (S) Min Max	0.437	0.500	0.562	0.625	0.750	0.812	0.937	1.125	1.312	1.500	1.687	1.875	2.062	2.250	2.625	3.000
Head Height (K) Min Max	0.153	0.201	0.233	0.281	0.313	0.361	0.393	0.463	0.543	0.597	0.678	0.773	0.838	0.934	1.074	1.203
Head Height (K) Min Max	0.163	0.211	0.243	0.291	0.323	0.371	0.403	0.483	0.563	0.627	0.718	0.813	0.878	0.974	1.134	1.263
Across corners e (MAX)	0.505	0.577	0.650	0.722	0.866	0.938	1.083	1.300	1.515	1.732	1.948	2.165	2.382	2.598	3.031	3.464
Thread Length b (Min)	2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6”
Major Dia at thread ( Class 2A) Min for UNC	0.2408	0.3026	0.3643	0.4258	0.4876	0.5495	0.6113	0.7353	0.8592	0.9830	1.1064	1.2314	1.3544	1.4794	1.7268	1.9751
Major Dia at thread (2A) Min for UNF	0.2425	0.3042	0.3667	0.4281	0.4906	0.5524	0.6149	0.7391	0.8631	0.9868	NOT RECOMMENDED
Major Dia at thread Class 2A Max for UNC	0.2490	0.3113	0.3737	0.4361	0.4985	0.5609	0.6234	0.7482	0.8731	0.9980	1.1228	1.2478	1.3726	1.4976	1.7473	1.9971

High Tensile Washers Dimensions

DIA	M16	M20	M22	M24	M27	M30	M36
HARDNESS FOR PL. WASHER	35 TO 45 HRC
Hardness for Hot Dip Galvd washer	26 HRC
Outer Dia (Max) d2	34	42	44	50	56	60	72
Inner Dia (Min) d1	18	22	24	26	30	33	39
Thickness (S)	3.1 TO 4.6
Tolerance for OD Minus(-)	1.6				1.9
Tolerance for ID Plus(+)	0.43	0.52				0.62

Hardened And Tempered Washers To Din 6916

All dimensions in mm

DIA	M12	M16	M20	M22	M24	M27	M30	M36
Weight in Kgs for 100 nos	0.703	1.46	1.96	2.43	3.06	5.02	6.32	11.50
Outer Dia (Max) d2	24	30	37	39	44	50	56	66
Inner Dia (Min) d1	13	17	21	23	25	28	31	37
Thickness (S)	3	4	4	4	4	5	5	6
Tolerance for OD Minus(-)	0.52		0.62			1	1.20
Tolerance for ID Plus(+)	0.27		0.33			0.52	0.62
Tolerance for thickness + or –	0.30					0.60

Dimensions of High Strength Nut

High Tensile Hex Nuts Dimensions

**All measurements in millimeters**

DIA	M4	M5	M6	M8	M10	M12	M14	M16	M18	M20	M22	M24	M27	M30	M33	M36	M39	M42	M45	M48	M52
Pitch	0.7	0.8	1	1.25	1.5	1.75	2	2	2.5	2.5	2.5	3	3	3.5	3.5	4	4	4.5	4.5	5	5
Across Flat (S) Max Min	7	8	10	13	16	18	21	24	27	30	34	36	41	46	50	55	60	65	70	75	80
Across Flat (S) Max Min	6.78	7.78	9.78	12.73	15.73	17.73	20.67	23.67	26.16	29.16	33	35	40	45	49	53.8	58.8	63.1	68.1	73.1	78.1
Thickness (M) Max Min	3.2	4.7	5.2	6.8	8.4	10.8	12.8	14.8	15.8	18	19.4	21.5	23.8	25.6	28.7	31	33.4	34	36	38	42
Thickness (M) Max Min	2.9	4.4	4.9	6.44	8.04	10.37	12.1	14.1	15.1	16.9	18.1	20.2	22.5	24.3	27.4	29.4	31.8	32.4	34.4	36.4	40.4
Across corners (E) Min	7.66	8.79	11.05	14.38	17.77	20.03	23.35	26.75	29.56	32.95	37.29	39.55	45.2	50.85	55.37	60.79	66.44	71.3	76.95	82.6	88.25
Minor Dia at thread (min)	3.242	4.134	4.917	6.647	8.376	10.106	11.835	13.835	15.294	17.294	19.294	20.752	23.752	26.211	29.211	31.67	34.67	37.129	40.129	42.587	46.587
Minor Dia at thread (max)	3.422	4.334	5.153	6.912	8.676	10.441	12.210	14.210	15.744	17.774	19.774	21.252	24.252	26.771	29.771	32.27	35.27	37.799	40.799	43.297	47.297

High Tensile Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84

All dimensions in inches

DIA	1/4	5/16	3/8	7/16	1/2	9/16	5/8	3/4	7/8	1	1 1/8	1 1/4	1 3/8	1 1/2	1 3/4	2
BSW Pitch (TPI)	20	18	16	14	12	12	11	10	9	8	7	7	–	6	5	4.5
BSF PITCH (TPI)	26	22	20	18	16	16	14	12	11	10	9	9	8	8	7	7
WIDTH Across Flat (S) Min Max	0.438	0.518	0.592	0.702	0.812	0.912	1.000	1.190	1.288	1.468	1.640	1.815	2.005	2.175	2.520	2.700
WIDTH Across Flat (S) Min Max	0.445	0.525	0.600	0.710	0.820	0.920	1.010	1.200	1.300	1.480	1.670	1.860	2.050	2.220	2.580	2.760
Thickness (M) Min Max	0.190	0.240	0.302	0.365	0.427	0.490	0.552	0.677	0.740	0.865	0.990	1.105	1.230	1.355	1.605	1.730
Thickness (M) Min Max	0.200	0.250	0.312	0.375	0.437	0.500	0.562	0.687	0.750	0.875	1.000	1.125	1.250	1.375	1.625	1.750
Across corners (Max inches)	0.51	0.61	0.69	0.82	0.95	1.06	1.17	1.39	1.50	1.71	1.93	2.15	2.37	2.56	2.98	3.19
Minor Dia at thread BSW (min)	0.1860	0.2413	0.2950	0.3461	0.3932	0.4557	0.5086	0.6220	0.7328	0.8400	0.9420	1.0670	–	1.2866	1.4938	1.7154
Minor Dia at thread BSW (max)	0.2030	0.2594	0.3145	0.3674	0.4169	0.4794	0.5338	0.6490	0.7620	0.8720	0.9776	1.1026	–	1.3269	1.5408	1.7668
Minor Dia at thread BSF (min)	0.2008	0.2543	0.3110	0.3663	0.4200	0.4825	0.5336	0.6432	0.7586	0.8720	0.9828	1.1078	1.2150	1.3400	1.5670	1.8170
Minor Dia at thread BSF (max)	0.2125	0.2684	0.3280	0.3844	0.4395	0.5020	0.5549	0.6669	0.7838	0.8990	1.0120	1.1370	1.2470	1.3720	1.6026	1.8526

High Tensile Hex Nuts In Unc/Unf Threads To Bs 1768-1963 Threads To Bs 1580

All dimensions in inches

DIA	1/4	5/16	3/8	7/16	1/2	9/16	5/8	3/4	7/8	1	1 1/8	1 1/4	1 3/8	1 1/2	1 3/4	2
UNC Pitch (TPI)	20	18	16	14	13	12	11	10	9	8	7	7	6	6	5	4.5
UNF Pitch (TPI)	28	24	24	24	20	20	18	16	14	12	NOT RECOMMENDED
Width Across Flat (S) Min Max	0.430	0.493	0.554	0.617	0.742	0.804	0.929	1.115	1.300	1.488	1.657	1.830	2.017	2.205	2.565	2.940
Width Across Flat (S) Min Max	0.437	0.500	0.562	0.625	0.750	0.812	0.937	1.125	1.312	1.500	1.687	1.875	2.062	2.250	2.625	3.000
Thickness (M) Min Max	0.214	0.261	0.323	0.370	0.432	0.479	0.542	0.631	0.740	0.844	0.949	1.037	1.147	1.251	1.470	1.684
Thickness (M) Min Max	0.224	0.271	0.333	0.380	0.442	0.489	0.552	0.651	0.760	0.874	0.989	1.087	1.197	1.311	1.530	1.754
Across corners (E) Max	0.505	0.577	0.650	0.722	0.866	0.938	1.083	1.300	1.515	1.732	1.948	2.165	2.382	2.598	3.031	3.464
Minor Dia at thread (min) UNC (2B)	0.1960	0.2520	0.3070	0.3600	0.4170	0.4720	0.5270	0.6420	0.7550	0.8650	0.9700	1.0950	1.1950	1.3200	1.5340	1.7590
Minor Dia at thread (max) UNC (2B)	0.2070	0.2650	0.3210	0.3760	0.4340	0.4900	0.5460	0.6630	0.7780	0.8900	0.9980	1.1230	1.2250	1.3500	1.5680	1.7950
Minor Dia at thread (min) UNF (2B)	0.2110	0.2670	0.3300	0.3830	0.4460	0.5020	0.5650	0.6820	0.7980	0.9100	NOT RECOMMENDED
Minor Dia at thread (max) UNF (2B)	0.2200	0.2770	0.3400	0.3950	0.4570	0.5150	0.5780	0.6960	0.8140	0.9280	NOT RECOMMENDED

High Strength Friction Grip Hex Nuts In Mm Threads To Is 6623-1985 Grades 8s & 10s

All dimensions in mm

DIA	M16	M20	M22	M24	M27	M30	M36
Pitch	2	2.5	2.5	3	3	3.5	4
Head Across Flat (B) Min	26.16	33	35	40	45	49	58.8
Head Across Flat (B) Max	27	34	36	41	46	50	60
Height (H) Min Max	16.4	19.4	22.3	22.9	26.3	29.1	35
Height (H) Min Max	17.1	20.7	23.6	24.2	27.6	30.7	36.6
Across corners C min	29.56	37.29	39.55	45.20	50.85	55.37	66.44
Minor Dia at thread (min)	14.235	17.694	19.694	21.202	24.252	26.761	32.270
Minor Dia at thread (max)	14.610	18.144	20.144	21.702	24.752	27.321	32.870

Dimensions of High Tensile Hex Screw

Dimensions of High Tensile Hex Screw

DIA	M4	M5	M6	M8	M10	M12	M14	M16	M18	M20	M22	M24	M27	M30	M33	M36	M39	M42	M45	M48	M52
Pitch	0.7	0.8	1	1.25	1.5	1.75	2	2	2.5	2.5	2.5	3	3	3.5	3.5	4	4	4.5	4.5	5	5
Grade A upto length	40	50	60	80	100	120	140	150					Grade A not applicable to these dia’s
Head Across Flat (S) Max Min(Grade A) Min (Grade B)	7	8	10	13	16	18	21	24	27	30	34	36	41	46	50	55	60	65	70	75	80
	6.78	7.78	9.78	12.73	15.73	17.73	20.67	23.67	26.67	29.67	33.38	35.38	Grade A not applicable to these dia’s
	6.64	7.64	9.64	12.57	15.57	17.57	20.16	23.16	26.16	29.16	33	35	40	45	49	53.8	58.8	63.1	68.1	73.1	78.1
Head Thickness (K) Tol + or – Grade A Grade B	2.8	3.5	4	5.3	6.4	7.5	8.8	10	11.5	12.5	14	15	17	18.7	21	22.5	25	26	28	30	33
	0.125	0.15			0.18				0.215				Grade A not applicable to these dia’s
	0.2	0.24			0.29				0.35					0.42							0.5
Across corners e Min Grade A Min Grade B	7.66	8.79	11.05	14.38	17.77	20.03	23.36	26.75	30.14	33.53	37.72	39.98	Grade A not applicable to these dia’s
Across corners e Min Grade A Min Grade B	7.5	8.63	10.89	14.2	17.59	19.85	22.78	26.17	29.56	32.95	37.29	39.55	45.2	50.85	55.37	60.79	66.44	71.3	76.95	82.6	88.25
Major Dia at thread (min)	3.838	4.826	5.794	7.76	9.732	11.701	13.682	15.682	17.623	19.623	21.623	23.577	26.577	29.522	32.522	35.465	38.465	41.437	44.437	47.399	51.399
Major Dia at thread (max)	3.978	4.976	5.974	7.972	9.968	11.966	13.962	15.962	17.958	19.958	21.958	23.952	26.952	29.947	32.947	35.94	38.94	41.937	44.937	47.929	51.929

Size Chart of High Tensile Bolts

Size Chart of High Tensile Bolts

Applications and Uses

Chemical Industries
Oil & Gas Industrires
Power Plant Industries
Shipbuilding Industries
Fertilizer Industrires
Petrochemical Industrires
Sugar Industrires
Cement Industrires