| Specification | ASTM A 193/ASME SA 193 |
| Standard | all International Standards and ASTM, DIN, BS |
| Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Length | 3 mm to 200 mm | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
| STANDARD | WERKSTOFF NR. | UNS |
| Alloy Steel GR 6 Nuts | - | - |
| Alloy Steel GR 7 Nuts | - | - |
| Alloy Steel GR 7 Nuts | - | - |
| Alloy Steel GR 7M Nuts | - | - |
| Grade | C | Mn | Si | P | S | Co | Cr |
| GR 6 | 0.15 min | 1.00 max | 1.00 max | 0.4 max | 0.03 max | - | 11.5-13.5 |
| GR 7 | 0.37-0.49% | 0.65-1.10% | 0.04% | 0.04% | 0.15-0.035% | 0.15-0.25% | 0.75-1.20% |
| GR 7M | 0.37 - 0.49 | 0.65 - 1.10 | 0.15 - 0.35 | 0.035 | 0.04 | 0.15 - 0.25 | 0.75 - 1.20 |
| Grade | Diameter | Tensile Strength | Yield Strength | Elongation | Reduction | Hardness |
| GR 6 | - | - | - | - | - | - |
| GR 7 | - | - | - | - | - | - |
| GR 7M | - | - | - | - | - | - |
