The Inconel Nuts such as Inconel 600 Nuts, Inconel 601 Nuts, Inconel 625 Nuts, Inconel 718 Nuts, and similar are made up of a chemical composition that consists of elements such as nickel, chromium, and molybdenum. These provide these Inconel Nuts good resistance towards corrosion and also provide them with great strength at highly elevated temperatures. These possess thermal stability properties; they can be utilized at cryogenic temperatures and can be used in service temperatures upto 2200F.
These Inconel nuts consist of high alloy content and therefore can withstand in environments that are bound with conditions that can cause corrosion. There is essentially no damage on Inconel nuts in moderate settings. Therefore they can withstand in environments such as the seawater environment and alkaline media. The combination of nickel and chromium gives resistance to oxidizing chemicals in more tough corrosive situations, but the high nickel and molybdenum levels provide resistance to non-oxidizing conditions.
Incoloy X-750 nuts are made from an alloy with nickel and cobalt as primary elements, and they also have chromium, titanium, and aluminum additives. At higher temperatures and pressures, these Inconel nuts are intended to have extraordinarily high strength and creep-rupture qualities.
Incoloy 825 nuts are made from chromium, iron, and nickel alloy with copper and molybdenum contents. Incoloy 825 Hex Nuts are well-known for their tight tolerance as well as exact dimensions. Incoloy 800HT Nuts are used in industries such as Oil and Gas Industry, Pulp & Paper Industry, etc. Incoloy 925 Nuts are also resistant to corrosion and are used in a range of applications.
| Specification | ASTM / ASME SB 166 / 164 / 425 / 166 / 446 / 574 / 472 |
| Standard |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Monel Monel® Alloy 400 Stud nuts length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Monel Alloy 400 Hex nuts |
| Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Length | 3 mm to 200 mm | Custom Sizes |
| Dimensions | DIN, ISO, ASTM, JIS, BS, GB, IS and all International Standards |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
| Inconel 718 | 2.4668 | N07718 | - | - | - | - | - |
| Inconel X-750 | 2.4669 | N07750 | - | - | - | - | - |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | - | X8NiCrAlTi32-21 |
| Incoloy 925 | - | N09925 | NCF 925 | - | - | - | - |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | - | 5.0 max | 58.0 min | 20.0 - 23.0 |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
| Incoloy X-750 | 0.08 max | 1.00 max | 0.50 max | 0.01 max | 0.50 max | 5.0 - 9.0 | 70.00 min | 14.00 - 17.00 |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 |
| 800HT | 0.03 max | 1.00 max | 0.5 max | 0.03 max | 1.5 - 3.0 | 22 min | – | 19.5 - 22.5 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
| Inconel X-750 | - | 1430°C | 1267 MPa | 868 MPa | 25 % |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
| 925 | 8.08 g/cm3 | 1311°C-1366 °C | 685 MPa | 271 MPa | 56% |
